Ultra-compact Photonic Crystal Based All Optical Half Adder

Ali Lalbakhsh; Fariborz Parandin; Reza Kamarian; Mohamadreza Jomour; Mohammad Alibakhshikenari

doi:10.1109/PIERS53385.2021.9694676

Ultra-compact Photonic Crystal Based All Optical Half Adder

Ali Lalbakhsh
, Fariborz Parandin
, Reza Kamarian
, Mohamadreza Jomour
, Mohammad Alibakhshikenari

Macquarie University
Islamic Azad University, Kermanshah Branch
Electronics Engineering Department
University of Rome "Tor Vergata"

Research output: Chapter in Book or Conference Publication/Proceeding › Conference Publication › peer-review

4 Citations (Scopus)

Abstract

In this paper, an all-optical semi-collector is designed. A photonic crystal platform has been used to design this optical half adder. The structure used in this design is a square lattice created by placing dielectric rods in the air. To achieve this half adder, the photonic band gap (PBG) property is used. Logic '0' means the power is close to zero and logic '1' means the power is close to the power of the light source in ON state. In the design of the optical half adder, the logical '1' has high power and the logical '0' has low power to reduce the error detection at the outputs. Also, this structure has small dimensions so that it can be used in optically integrated circuits. Light propagation in the input and output paths is done using linear defects.

Original language	English
Title of host publication	2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	976-983
Number of pages	8
ISBN (Electronic)	9781728172477
DOIs	https://doi.org/10.1109/PIERS53385.2021.9694676
Publication status	Published - 2021
Externally published	Yes
Event	2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Hangzhou, China Duration: 21 Nov 2021 → 25 Nov 2021

Publication series

Name	Progress in Electromagnetics Research Symposium
Volume	2021-November
ISSN (Print)	1559-9450
ISSN (Electronic)	1931-7360

Conference

Conference	2021 Photonics and Electromagnetics Research Symposium, PIERS 2021
Country/Territory	China
City	Hangzhou
Period	21/11/21 → 25/11/21

Access to Document

10.1109/PIERS53385.2021.9694676

Cite this

Lalbakhsh, A., Parandin, F., Kamarian, R., Jomour, M., & Alibakhshikenari, M. (2021). Ultra-compact Photonic Crystal Based All Optical Half Adder. In 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings (pp. 976-983). (Progress in Electromagnetics Research Symposium; Vol. 2021-November). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PIERS53385.2021.9694676

@inproceedings{95ac8f5b13e2490499ee0e3a60bb33db,

title = "Ultra-compact Photonic Crystal Based All Optical Half Adder",

abstract = "In this paper, an all-optical semi-collector is designed. A photonic crystal platform has been used to design this optical half adder. The structure used in this design is a square lattice created by placing dielectric rods in the air. To achieve this half adder, the photonic band gap (PBG) property is used. Logic '0' means the power is close to zero and logic '1' means the power is close to the power of the light source in ON state. In the design of the optical half adder, the logical '1' has high power and the logical '0' has low power to reduce the error detection at the outputs. Also, this structure has small dimensions so that it can be used in optically integrated circuits. Light propagation in the input and output paths is done using linear defects.",

author = "Ali Lalbakhsh and Fariborz Parandin and Reza Kamarian and Mohamadreza Jomour and Mohammad Alibakhshikenari",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 ; Conference date: 21-11-2021 Through 25-11-2021",

year = "2021",

doi = "10.1109/PIERS53385.2021.9694676",

language = "English",

series = "Progress in Electromagnetics Research Symposium",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "976--983",

booktitle = "2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings",

}

Lalbakhsh, A, Parandin, F, Kamarian, R, Jomour, M & Alibakhshikenari, M 2021, Ultra-compact Photonic Crystal Based All Optical Half Adder. in 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings. Progress in Electromagnetics Research Symposium, vol. 2021-November, Institute of Electrical and Electronics Engineers Inc., pp. 976-983, 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021, Hangzhou, China, 21/11/21. https://doi.org/10.1109/PIERS53385.2021.9694676

Ultra-compact Photonic Crystal Based All Optical Half Adder. / Lalbakhsh, Ali; Parandin, Fariborz; Kamarian, Reza et al.
2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2021. p. 976-983 (Progress in Electromagnetics Research Symposium; Vol. 2021-November).

Research output: Chapter in Book or Conference Publication/Proceeding › Conference Publication › peer-review

TY - GEN

T1 - Ultra-compact Photonic Crystal Based All Optical Half Adder

AU - Lalbakhsh, Ali

AU - Parandin, Fariborz

AU - Kamarian, Reza

AU - Jomour, Mohamadreza

AU - Alibakhshikenari, Mohammad

PY - 2021

Y1 - 2021

N2 - In this paper, an all-optical semi-collector is designed. A photonic crystal platform has been used to design this optical half adder. The structure used in this design is a square lattice created by placing dielectric rods in the air. To achieve this half adder, the photonic band gap (PBG) property is used. Logic '0' means the power is close to zero and logic '1' means the power is close to the power of the light source in ON state. In the design of the optical half adder, the logical '1' has high power and the logical '0' has low power to reduce the error detection at the outputs. Also, this structure has small dimensions so that it can be used in optically integrated circuits. Light propagation in the input and output paths is done using linear defects.

AB - In this paper, an all-optical semi-collector is designed. A photonic crystal platform has been used to design this optical half adder. The structure used in this design is a square lattice created by placing dielectric rods in the air. To achieve this half adder, the photonic band gap (PBG) property is used. Logic '0' means the power is close to zero and logic '1' means the power is close to the power of the light source in ON state. In the design of the optical half adder, the logical '1' has high power and the logical '0' has low power to reduce the error detection at the outputs. Also, this structure has small dimensions so that it can be used in optically integrated circuits. Light propagation in the input and output paths is done using linear defects.

UR - https://www.scopus.com/pages/publications/85126391360

U2 - 10.1109/PIERS53385.2021.9694676

DO - 10.1109/PIERS53385.2021.9694676

M3 - Conference Publication

AN - SCOPUS:85126391360

T3 - Progress in Electromagnetics Research Symposium

SP - 976

EP - 983

BT - 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021

Y2 - 21 November 2021 through 25 November 2021

ER -

Lalbakhsh A, Parandin F, Kamarian R, Jomour M, Alibakhshikenari M. Ultra-compact Photonic Crystal Based All Optical Half Adder. In 2021 Photonics and Electromagnetics Research Symposium, PIERS 2021 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2021. p. 976-983. (Progress in Electromagnetics Research Symposium). doi: 10.1109/PIERS53385.2021.9694676

Ultra-compact Photonic Crystal Based All Optical Half Adder

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this