TY - GEN
T1 - THE IGNITION OF C1 - C7 NATURAL GAS BLENDS AND THE EFFECT OF HYDROGEN ADDITION IN THE LOW AND HIGH TEMPERATURE REGIMES
AU - Mohamed, A. Abd El Sabor
AU - Sahu, Amrit Bikram
AU - Panigrahy, Snehasish
AU - Bourque, Gilles
AU - Curran, Henry
N1 - Publisher Copyright:
Copyright © 2022 by Siemens Energy.
PY - 2022
Y1 - 2022
N2 - New ignition delay time (IDT) measurements for two natural gas (NG) blends composed of C1 - C7 n-alkanes, NG6 (C1:60.625%, C2:20%, C3:10%, C4:5%, nC5:2.5%, nC6:1.25%, nC7:0.625%) and NG7 (C1:72.635%, C2:10%, C3:6.667%, C4:4.444%, nC5:2.965%, nC6:1.976%, nC7:1.317%) by volume with methane as the major component are presented. The measurements were recorded using a high-pressure shock tube (HPST) for stoichiometric fuel in air mixtures at reflected shock pressures (p5) of 20 - 30 bar and at temperatures (T5) of 987 - 1420 K. The current results together with rapid compression machine (RCM) measurements in the literature show that higher concentrations of the higher n-alkanes (C4 - C7) ~1.327% in the NG7 blend compared to the NG6 blend result in the ignition for NG7 being almost a factor of two faster than NG6 at compressed temperatures of (TC) ≤ 1000 K. This is due to the low temperature chain branching reactions that occur for higher alkane oxidation kinetics in this temperature range. On the contrary, at TC > 1000 K, NG6 exhibits ~20% faster ignition than NG7 primarily because about 12% of the methane in the NG7 blend is primarily replaced by ethane (~10%) in NG6, which is significantly more reactive than methane at these higher temperatures. The performance of NUIGMech1.2 in simulating these data is assessed and it can reproduce the experiments within 20% for all the conditions considered in the study. We also investigate the effect of hydrogen addition to the auto-ignition of these NG blends using NUIGMech1.2 which has been validated against the existing literature for natural gas/hydrogen blends. The results demonstrate that hydrogen addition has both an inhibiting and promoting effect in the low- and hightemperatures regime, respectively. Sensitivity analyses of the hydrogen/NG mixtures are performed to understand the underlying kinetics controlling these opposite ignition effects. At low temperatures, H-atom abstraction by ?H radicals from C3 and larger fuels are the key chain-branching reactions consuming the fuel and providing the necessary fuel radicals which undergo low temperature chemistry (LTC) leading to ignition. However, with the addition of hydrogen to the fuel mixture, the competition for ?H radicals by H2 via the reaction H2+?H↔?+H2O reduces the progress of the LTC of the higher hydrocarbon fuels thereby inhibiting ignition. At higher temperatures, since ?+O2↔Ö+?H is the most sensitive reaction promoting reactivity, the higher concentrations of H2 in the fuel mixture leads to higher ? atom concentrations leading to faster ignition due to an enhanced rate of the ?+O2↔Ö+?H reaction.
AB - New ignition delay time (IDT) measurements for two natural gas (NG) blends composed of C1 - C7 n-alkanes, NG6 (C1:60.625%, C2:20%, C3:10%, C4:5%, nC5:2.5%, nC6:1.25%, nC7:0.625%) and NG7 (C1:72.635%, C2:10%, C3:6.667%, C4:4.444%, nC5:2.965%, nC6:1.976%, nC7:1.317%) by volume with methane as the major component are presented. The measurements were recorded using a high-pressure shock tube (HPST) for stoichiometric fuel in air mixtures at reflected shock pressures (p5) of 20 - 30 bar and at temperatures (T5) of 987 - 1420 K. The current results together with rapid compression machine (RCM) measurements in the literature show that higher concentrations of the higher n-alkanes (C4 - C7) ~1.327% in the NG7 blend compared to the NG6 blend result in the ignition for NG7 being almost a factor of two faster than NG6 at compressed temperatures of (TC) ≤ 1000 K. This is due to the low temperature chain branching reactions that occur for higher alkane oxidation kinetics in this temperature range. On the contrary, at TC > 1000 K, NG6 exhibits ~20% faster ignition than NG7 primarily because about 12% of the methane in the NG7 blend is primarily replaced by ethane (~10%) in NG6, which is significantly more reactive than methane at these higher temperatures. The performance of NUIGMech1.2 in simulating these data is assessed and it can reproduce the experiments within 20% for all the conditions considered in the study. We also investigate the effect of hydrogen addition to the auto-ignition of these NG blends using NUIGMech1.2 which has been validated against the existing literature for natural gas/hydrogen blends. The results demonstrate that hydrogen addition has both an inhibiting and promoting effect in the low- and hightemperatures regime, respectively. Sensitivity analyses of the hydrogen/NG mixtures are performed to understand the underlying kinetics controlling these opposite ignition effects. At low temperatures, H-atom abstraction by ?H radicals from C3 and larger fuels are the key chain-branching reactions consuming the fuel and providing the necessary fuel radicals which undergo low temperature chemistry (LTC) leading to ignition. However, with the addition of hydrogen to the fuel mixture, the competition for ?H radicals by H2 via the reaction H2+?H↔?+H2O reduces the progress of the LTC of the higher hydrocarbon fuels thereby inhibiting ignition. At higher temperatures, since ?+O2↔Ö+?H is the most sensitive reaction promoting reactivity, the higher concentrations of H2 in the fuel mixture leads to higher ? atom concentrations leading to faster ignition due to an enhanced rate of the ?+O2↔Ö+?H reaction.
KW - Auto-ignition
KW - Chemical kinetics
KW - Gas turbines
KW - Hydrogen
KW - Internal Combustion Engines
KW - Natural gas
KW - Oxidation
KW - ST
UR - http://www.scopus.com/inward/record.url?scp=85141433183&partnerID=8YFLogxK
U2 - 10.1115/GT2022-82305
DO - 10.1115/GT2022-82305
M3 - Conference Publication
AN - SCOPUS:85141433183
T3 - Proceedings of the ASME Turbo Expo
BT - Combustion, Fuels, and Emissions
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition, GT 2022
Y2 - 13 June 2022 through 17 June 2022
ER -