Methane ethane propane mixture oxidation at high pressures and at high, intermediate and low temperatures

The oxidation of methane ethane propane mixtures, for blends containing 90 6.6 3.3 70 15 15 and 70 20 10 percent by Volume of each fuel respectively in air, has been studied over the temperature range 770-1580 K, at compressed gas pressures of approximately 1, 10, 20, 30, 40 and 50 atm and at equivalence ratios, of 0.5, 1.0 and 2.0 using, both it high-pressure shock tube and a rapid compression machine. The present work represents the most comprehensive set of methane ethane propane ignition delay time measurements available in a single Study which extends the composition envelope over ail industrially relevant pressure range. It is list the first such Study to present ignition delay times at significantly overlapping conditions from both a rapid Compression machine and a shock tube. The data Were simulated using it detailed chemical kinetic model comprised of 289 species and 1580 reactions. It was found that qualitatively, the model reproduces correctly the effect of change in equivalence ratio and pressure, predicting that fuel-rich, high-pressure mixtures ignite fastest while fuel-lean, low-pressure mixtures ignite slowest. Moreover, the reactivity as a function Of temperature is well Captured with the model predicting negative temperature coefficient behavior similar to the experiments. Quantitatively the model is in general excellent agreement with the experimental results but is faster than experiment tor the fuel-rich (Phi = 2.0) mixture containing the highest quantity of propane (70 15 15 mixture) at the lowest temperatures (770-900 K). (C) 2008 The Combustion Institute. Published by Elsevier Inc. All rights reserved.