Skip to main navigation Skip to search Skip to main content

Development of a prototype active optics system for future space telescopes

  • Fraunhofer Institute for Applied Optics and Precision Engineering IOF
  • Friedrich Schiller University Jena

Research output: Contribution to a Journal (Peer & Non Peer) › Article › peer-review

21 Citations (Scopus)

Abstract

It is envisaged that future large space telescopes will be lightweight and employ active optics to maintain optical quality throughout the mission lifetime. We have proposed a 4 m, two-mirror space telescope with an active optics system based on reimaging the telescope primary mirror onto a small active mirror (110 mm optical pupil). Using Zemax, we demonstrate the feasibility of using this mirror to correct low-order Zernike aberrations and show that the aberration is well corrected across the 2.5 arcmin field of the telescope, operating at 0.55 mu m. We describe the modeling carried out to develop the active mirror design. Using end-to-end modeling, a 25-actuator mirror with polar actuator geometry, and a ratio of mechanical to optical pupil diameter of 2 has been chosen. A single-actuator prototype has been manufactured and used to test stroke, linearity, and hysteresis. Finally, we describe the design of a laboratory breadboard that will image phase screens onto an exact replica of the space active mirror and show the results of measuring the phase screen accuracy. (C) 2018 Optical Society of America
Original languageEnglish (Ireland)
Pages (from-to)E101-E106
JournalAppl. Opt.
Volume57
Issue number22
Publication statusPublished - 1 Aug 2018

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 3 - Good Health and Well-being
    SDG 3 Good Health and Well-being

Fingerprint

Dive into the research topics of 'Development of a prototype active optics system for future space telescopes'. Together they form a unique fingerprint.

Cite this