Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))

Yaoyi Geng; Noel M. Harrison

doi:10.1016/j.msea.2021.140748

Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))

Yaoyi Geng
, Noel M. Harrison

Mechanical Engineering

University of Galway
I-Form Advanced Manufacturing Research Centre
IComp Irish Composites Centre
Research Centre for Marine and Renewable Energy

Research output: Contribution to a Journal (Peer & Non Peer) › Comment/debate

1 Citation (Scopus)

Abstract

The authors regret that the crystalline structures for Ti6Al4V α and β phases were incorrectly labelled in the original online graphical abstract only. The corrected graphical abstract is shown below. [Figure presented] Corrected graphical abstract The authors would like to apologise for any inconvenience caused.

Original language	English
Article number	140748
Journal	Materials Science and Engineering: A
Volume	804
DOIs	https://doi.org/10.1016/j.msea.2021.140748
Publication status	Published - 15 Feb 2021

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1016/j.msea.2021.140748

Fingerprint

Dive into the research topics of 'Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))'. Together they form a unique fingerprint.

Cite this

Geng, Y., & Harrison, N. M. (2021). Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736)). Materials Science and Engineering: A, 804, Article 140748. https://doi.org/10.1016/j.msea.2021.140748

Geng, Yaoyi ; Harrison, Noel M. / Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing : Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736)). In: Materials Science and Engineering: A. 2021 ; Vol. 804.

@article{43b4c40535704fc98e6cae70f1c13333,

title = "Corrigendum to {\textquoteleft}Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling{\textquoteright} [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science \& Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))",

abstract = "The authors regret that the crystalline structures for Ti6Al4V α and β phases were incorrectly labelled in the original online graphical abstract only. The corrected graphical abstract is shown below. [Figure presented] Corrected graphical abstract The authors would like to apologise for any inconvenience caused.",

author = "Yaoyi Geng and Harrison, \{Noel M.\}",

note = "Publisher Copyright: {\textcopyright} 2021 Elsevier B.V.",

year = "2021",

month = feb,

day = "15",

doi = "10.1016/j.msea.2021.140748",

language = "English",

volume = "804",

journal = "Materials Science and Engineering: A",

issn = "0921-5093",

publisher = "Elsevier Ltd",

}

Geng, Y & Harrison, NM 2021, 'Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))', Materials Science and Engineering: A, vol. 804, 140748. https://doi.org/10.1016/j.msea.2021.140748

Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736)). / Geng, Yaoyi; Harrison, Noel M.
In: Materials Science and Engineering: A, Vol. 804, 140748, 15.02.2021.

Research output: Contribution to a Journal (Peer & Non Peer) › Comment/debate

TY - JOUR

T1 - Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing

T2 - Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))

AU - Geng, Yaoyi

AU - Harrison, Noel M.

PY - 2021/2/15

Y1 - 2021/2/15

N2 - The authors regret that the crystalline structures for Ti6Al4V α and β phases were incorrectly labelled in the original online graphical abstract only. The corrected graphical abstract is shown below. [Figure presented] Corrected graphical abstract The authors would like to apologise for any inconvenience caused.

AB - The authors regret that the crystalline structures for Ti6Al4V α and β phases were incorrectly labelled in the original online graphical abstract only. The corrected graphical abstract is shown below. [Figure presented] Corrected graphical abstract The authors would like to apologise for any inconvenience caused.

UR - https://www.scopus.com/pages/publications/85099644794

U2 - 10.1016/j.msea.2021.140748

DO - 10.1016/j.msea.2021.140748

M3 - Comment/debate

SN - 0921-5093

VL - 804

JO - Materials Science and Engineering: A

JF - Materials Science and Engineering: A

M1 - 140748

ER -

Geng Y, Harrison NM. Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736)). Materials Science and Engineering: A. 2021 Feb 15;804:140748. doi: 10.1016/j.msea.2021.140748

Corrigendum to ‘Functionally graded bimodal Ti6Al4V fabricated by powder bed fusion additive manufacturing: Crystal plasticity finite element modelling’ [Mater. Sci. Eng. A 773 (2020) 138736] (Materials Science & Engineering A (2020) 773, (S0921509319315229), (10.1016/j.msea.2019.138736))

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this