Categorization of tars from fast pyrolysis of pure lignocellulosic compounds at high temperature

  • Anna Trubetskaya
  • , Nabil Souihi
  • , Kentaro Umeki

Research output: Contribution to a Journal (Peer & Non Peer)Articlepeer-review

35 Citations (Scopus)

Abstract

This study presents how the yields of different tar compounds from pure lignocellulosic compounds respond to the change in temperature and residence time. Experiments were carried out with a drop tube furnace in the temperature range from 800 to 1250 °C. The tar composition was characterized by gas chromatography with a flame ionization detector and mass spectrometry using a dual detector system. Longer residence time and higher heat treatment temperatures increased the soot formation and decreased the tar yields. Soot yields from lignin samples were greater than soot yields from holocellulose pyrolysis. The dominating products in tars from pyrolysis of all lignocellulosic compounds were benzene and toluene. Cellulose and hemicellulose pyrolysis produced greater amount of oxygenates in tars, whereas lignin tar was rich in phenols, polycyclic hydrocarbons and naphthalenes. Simultaneous reduction of tar and soot was achieved by impregnation of lignin from wheat straw with alkali metals. The OPLS-DA model can accurately explain the differences in tar composition based on the experimental mass spectrometry data.

Original languageEnglish
Pages (from-to)751-759
Number of pages9
JournalRenewable Energy
Volume141
DOIs
Publication statusPublished - Oct 2019
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Fast pyrolysis
  • Lignocellulosic compounds
  • Potassium
  • Principal component analysis
  • Tar

Fingerprint

Dive into the research topics of 'Categorization of tars from fast pyrolysis of pure lignocellulosic compounds at high temperature'. Together they form a unique fingerprint.

Cite this