Skip to main navigation Skip to search Skip to main content

A reconfigurable MTM-EMBG MIMO antenna array with solar panel integration for sustainable 5G networks

  • Saif Al-Attar
  • , Mohammad Alibakhshikenari
  • , Yazeed Mohammad Qasaymeh
  • , Mohammed Abdulrahman Dawood Al-Obaidi
  • , Bal S Virdee
  • , H Benetatos
  • , Nur Syazreen Ahmad
  • , Astrit Krasniqi
  • , Taha A Elwi
  • , Muhammad Akmal Chaudhary
  • , Nisar Ahmad Abbasi
  • , Patrizia Livreri
  • , Takfarinas Saber
  • School of Electrical and Electronic Engineering
  • Lero
  • Lero the Research Ireland Centre for Software
  • College of Science and Engineering
  • Department of Electrical and Electronics Engineering
  • Dogus University
  • Majmaah University
  • Altinbaṣ University
  • London Metropolitan University
  • Al-Nahrain University
  • Ajman University
  • Electrical Engineering and Computer Science School the Information Systems School of QUT
  • University of Palermo

Research output: Contribution to a Journal (Peer & Non Peer)Articlepeer-review

4 Citations (Scopus)

Abstract

This paper presents a compact, reconfigurable sub-6 GHz MIMO antenna array integrated with a solar panel, targeting energy-efficient and sustainable 5G communication networks. The proposed design addresses the critical challenges of antenna performance degradation and mutual coupling that typically arise when antennas are integrated with photovoltaic structures. To overcome these limitations, the antenna employs a metamaterial (MTM) radiating patch composed of a 5 × 3 Hilbert-curve split-ring resonator (SRR) array, which enhances impedance bandwidth and gain through plasmonic resonance behavior. Additionally, a defected electromagnetic band-gap (EMBG) ground plane is introduced to suppress surface waves and back radiation, thereby improving radiation efficiency and isolation. A novel composite right/left-handed (CRLH) isolation wall is incorporated between antenna elements to achieve strong mutual coupling reduction within an ultra-compact footprint. Frequency reconfigurability is realized using PIN diodes, enabling dynamic control of the operating bands and radiation characteristics. The proposed two-element MIMO configuration is mounted beneath a solar panel, demonstrating negligible impact on photovoltaic I-V characteristics, while simultaneously providing a gain enhancement due to constructive electromagnetic interaction. The antenna operates over a wide frequency range between 2.7 and 6.0 GHz and beyond, with resonances around 3 and 5 GHz, achieving a maximum gain of approximately 7.3 dBi.

Original languageEnglish
JournalScientific Reports
DOIs
Publication statusE-pub ahead of print - 11 May 2026

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Fingerprint

Dive into the research topics of 'A reconfigurable MTM-EMBG MIMO antenna array with solar panel integration for sustainable 5G networks'. Together they form a unique fingerprint.

Cite this