Abstract
For many years, intensive research has been undertaken to increase the life of valve-regulated lead-acid (VRLA) batteries. Overcharging results in excessive temperature in the battery, which degrades the chemical composition of the electrolyte. When the battery reaches the end-of-charge state, the energy being supplied to the battery is no longer consumed in the charge reaction and this additional energy is dissipated as heat within the battery. At this point, the oxygen cycle accelerates, which leads to temperature rise inside the battery. State-of-the-art control technology is required to control the charging of the battery and prevent the battery going into thermal runaway. This paper discusses the charging strategies for VRLA batteries in standby applications. Intermittent charging decreases the continuous overcharge which arises in the case of float charging. The charging regime used in intermittent charging must ensure the full recharge of the battery. This paper describes a new efficient method of charging batteries employing an intermittent charging technique called "Interrupted Charge Control." Laboratory tests and results are presented.
| Original language | English (Ireland) |
|---|---|
| Pages (from-to) | 1337-1342 |
| Number of pages | 6 |
| Journal | Ieee Transactions On Industrial Electronics |
| Volume | 52 |
| Issue number | 5 |
| Publication status | Published - 1 Oct 2005 |
Keywords
- Battery life
- Emergency/standby power systems
- Intermittent charging
- Lead-acid battery
- Pulsed-current charging
Authors (Note for portal: view the doc link for the full list of authors)
- Authors
- Bhatt, M, Hurley, W G and W H Wölfle